Raymarine forum / Raymarine Forums / Product Selection Assistance v / (DG) ST60+ Replacement

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) ST60+ Replacement
03-13-18, 08:55 AM (This post was last modified: 03-13-18 10:48 AM by Derek - Raymarine - Moderator.)
Post: #1
marccooper Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2016
Reputation: 0
(DG) ST60+ Replacement
I would like to replace my existing ST60+ with a new i70s. Is the round cutout the same for the two units?
Find all posts by this user
Quote this message in a reply
03-13-18, 10:53 AM (This post was last modified: 03-13-18 10:54 AM by Derek - Raymarine - Moderator.)
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: (DG) ST60+ Replacement
Hi marccooper

Thank you for your enquiry.

Below is the template for the i70s for your information.

[Image: attachment.php?aid=1675]

As you can see the i70s requires a cutout 2mm larger diameter than the ST60
regards


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication