Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] M92652 to E-80
03-17-18, 07:44 AM (This post was last modified: 03-19-18 08:32 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] M92652 to E-80
I have a M92652 scanner, SN 0780104 connected to a E-80, E02011 0950925, ver 5.69. Scanner software .03.00.
The e-80 does not see the scanner. The scanner worked fine with my RL70C Plus which I replaced with the E-80.
Any help would be appreciated, Thanks, David Gillette
Find all posts by this user
Quote this message in a reply
03-19-18, 08:39 AM
Post: #2
RE: [CA] M92652 to E-80
Welcome to the Raymarine Forum David,

Please click here to view a FAQ addressing this subject. Per the referenced FAQ, should your radome not feature the "-S" suffix in its product ID as indicated within the FAQ, then the analog 4D radome may not be used with a C/E-Series Classic MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)