Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Cant get new es98 mfd and autopilot to turn on
03-21-18, 06:10 PM (This post was last modified: 03-21-18 06:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Cant get new es98 mfd and autopilot to turn on
Just bought a es98 mfd, type 1 hyd pump and ACU 200 controller and cannot get the mfd to even light up. Tried to follow directions very carefully but what am I doing wrong? Does the es98need the NEMA 0183 wire to have power? I thought if the ACU had power and the data cables were connected to a blue backbone and the backbone connected to a T piece with spur cable going to the es98, it would have power. HELP please
Find all posts by this user
Quote this message in a reply
03-22-18, 10:15 AM
Post: #2
RE: [CA] Cant get new es98 mfd and autopilot to turn on
Welcome to the Raymarine Forum Phil,

Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, Raymarine Multifunction Displays (MFDs) are neither designed to be powered via their communications interface(s) nor to supply power to a SeaTalkng / NMEA 2000 backbone. MFDs are designed to be powered via the power cable included within the MFD's package.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us