Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] E-80 MFD Time issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] E-80 MFD Time issues
03-23-18, 09:38 AM (This post was last modified: 03-23-18 09:39 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] E-80 MFD Time issues
Welcome to the Raymarine Forum Charles,

Please click here to view a FAQ addressing how a Raystar 130/150 GPS Sensor should be interfaced to an E-Series Classic MFD. If interfaced in the manner specified within the referenced FAQ, then it is recommended that you verify that the Raystar 125 GPS Sensor has been completely disconnected from the system. If so, then please attach a system diagram to this thread. The diagram should identify the make/model of each of the marine electronics product within the system and how they have been interfaced to one another ... we have a concern that a data loop may have been created through the method in which the electronics within this system have been interfaced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] E-80 MFD Time issues - Charles - 03-23-18, 12:40 AM
RE: [CA] E-80 MFD Time issues - Chuck - Raymarine - Moderator - 03-23-18 09:38 AM
RE: [CA] E-80 MFD Time issues - Charles - 03-24-18, 11:57 AM
RE: [CA] E-80 MFD Time issues - Charles - 05-07-18, 09:04 AM
RE: [CA] E-80 MFD Time issues - Charles - 05-10-18, 03:11 PM
RE: [CA] E-80 MFD Time issues - Charles - 07-05-19, 09:06 AM
RE: [CA] E-80 MFD Time issues - Charles - 07-16-19, 11:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication