Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] E-80 MFD Time issues
05-11-18, 10:39 AM
Post: #7
RE: [CA] E-80 MFD Time issues
Charles,

Per our phone conversation,
- you will need to disconnect the MFD from the SeaTalk bus ... simply unplug its SeaTalk/Alarm Cable
- you will need to connect the MFD's SeaTalk/NMEA 2000 port to the SeaTalkng/NMEA 2000 backbone via the A06061 Cable
- you will need to power the SeaTalkng/NMEA 2000 backbone using the supplied SeaTalkng Power Cable (red w/black stripe)
- you will need to disconnect the red lead(s) of the SeaTalk cables which are presently connected to the red SeaTalk terminal(s) of the autopilot course computer.

Reference Materials:
SeaTalkng Reference Manual: https://raymarine.app.box.com/s/2ulwt6ye...3388950831
SeaTalkng Networking Components web page (also within the aforementioned SeaTalkng Reference Manual): http://www.raymarine.com/view/?id=5536
SeaTalkng Sample System Diagram: http://www.raymarine.com/view/?id=400
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] E-80 MFD Time issues - Charles - 03-23-18, 12:40 AM
RE: [CA] E-80 MFD Time issues - Charles - 03-24-18, 11:57 AM
RE: [CA] E-80 MFD Time issues - Charles - 05-07-18, 09:04 AM
RE: [CA] E-80 MFD Time issues - Charles - 05-10-18, 03:11 PM
RE: [CA] E-80 MFD Time issues - Chuck - Raymarine - Moderator - 05-11-18 10:39 AM
RE: [CA] E-80 MFD Time issues - Charles - 07-05-19, 09:06 AM
RE: [CA] E-80 MFD Time issues - Charles - 07-16-19, 11:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)