Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Reloading LightHouse Charts
04-14-18, 05:35 PM (This post was last modified: 04-16-18 02:40 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Reloading LightHouse Charts
I purchased an Axiom 12 and a 9 in December, 2017. Included with the MFD's were LightHouse Charts and Navionics. Due to a formatting error on the supplied card, the card needed to be reformatted. The reformatting erased all charts. I was able to reload the Navionics charts through my subscription. How can I reload the LightHouse charts?

Jeffrey Guttenberger
Find all posts by this user
Quote this message in a reply
04-16-18, 02:40 PM
Post: #2
RE: [CA] Reloading LightHouse Charts
Welcome to the Raymarine Forum Jeffrey,

The LightHouse Charts stored on a LightHouse chart card are encrypted to the LightHouse_ID.txt file stored on chart card. Should all of the chart card's contents have been copied to a computer prior to formatting the chart card, then these files (to include the LightHouse_ID.txt file would simply be copied back onto the same microSD card. However, should this complete save not have been performed or another microSD memory card be used, then it would be necessary to purchase the LightHouse charts (US East Coast or US West Coast NOAA Vector charts cost $9.99) the LightHouse Charts Store and the download them to a microSD memory card which has been populated with a LightHouse_ID.txt file by any MFD running LightHouse II or LightHouse 3 software. Raymarine's LightHouse Manager computer software is used to download purchased charts from the Charts Store to the aforementioned microSD memory card.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us