Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] es127 WiFi
04-20-18, 11:21 AM (This post was last modified: 04-24-18 12:15 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] es127 WiFi
Are WiFi updates ever going to be re-available on the es series MFDs for wireless software updates when running LH3? Thanks

Jack - MS Gulf Coast
Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 -
Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers.
Find all posts by this user
Quote this message in a reply
04-24-18, 10:49 AM (This post was last modified: 04-24-18 01:07 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] es127 WiFi
Welcome to the Raymarine Forum MSjack,

The update from LightHouse II to LightHouse 3 software must be performed via a microSD memory card which has been populated with the LightHouse 3.3.x or later software (v3.4.66 at the time of this response). A feature request will be submitted to permit these MFDs to support future software updates via their Wi-Fi communications interfaces.

Please click here more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
04-27-18, 01:40 PM (This post was last modified: 04-27-18 02:50 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA] es127 WiFi
Thanks Chuck. I have already updated my es127 to LH3 via SD and really like the new interface. Thanks again.

Jack - MS Gulf Coast
Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 -
Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers.
Find all posts by this user
Quote this message in a reply
04-27-18, 02:50 PM
Post: #4
RE: [CA] es127 WiFi
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)