Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST40 clamping bracket CAD drawing
04-05-16, 02:18 PM
Post: #1
ST40 clamping bracket CAD drawing
Is there a 2D CAD drawing for the "clamping bracket" for an ST40 display?

I have some bulkhead thickness challenges, and so need a plate that's 1/8" thick, not a bracket that's 3/4" thick, as is the one supplied with the instruments.

I could just drill and file until I get it right, but since I have a CNC machine available, I'd rather just let the computer do all the work. :)

Thanks in advance.

There is NOTHING -- absolutely nothing -- half so much worth doing as simply messing about in boats.
Find all posts by this user
Quote this message in a reply
04-07-16, 09:04 AM
Post: #2
RE: ST40 clamping bracket CAD drawing
The ST40 is the same clamp bracket as the current i40 displays. I have enclosed a link to the 2D and 3D models available on the website.

https://raymarine.app.box.com/s/njusjm43xgglz5ggdhhd
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)