Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Red path on Axiom Pro RVX
04-30-18, 08:14 AM (This post was last modified: 04-30-18 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Red path on Axiom Pro RVX
New Configuration: Dual Axiom Pro RVX 12, EV 150 autopilot, 24 inch HD radar, RV100, B175HW, M265LM, RS-150, 70 VHF, Navionics Platinum+. Went out on sea trials this weekend. New electronics worked very nice. I did notice a wide red path on the chart screen about 50 foot wide from the home-port marina out to the inlet. Look at the Lighthouse manual from the March 2018 update and didn't see anything noted. What is this?

Thanks
Find all posts by this user
Quote this message in a reply
04-30-18, 04:05 PM
Post: #2
RE: [CA] Red path on Axiom Pro RVX
Welcome back to the Raymarine Forum Karlista,

The wide red path which you have described sounds like the SonarChart Live Feature. Please click here to view a FAQ addressing this subject. Should you not desire to see this feature, then it may be configured OFF via the command sequence MENU->DEPTHS->SONARCHART LIVE->OFF from within the Chart application.
Visit this user's website Find all posts by this user
Quote this message in a reply
04-30-18, 05:57 PM
Post: #3
RE: [CA] Red path on Axiom Pro RVX
Thanks Chuck. The link you provided with description and pics shows exactly what is being shown on the chart app. Spot on.
Find all posts by this user
Quote this message in a reply
05-01-18, 08:24 AM
Post: #4
RE: [CA] Red path on Axiom Pro RVX
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us