Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Seeing own boat as AIS target
05-02-18, 03:44 PM (This post was last modified: 05-04-18 12:30 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Seeing own boat as AIS target
We are getting our own boat as an AIS target on the Axiom Pro MFD's.(Axiom pro 9 & 15) We updated the software on the MFD's and just did the software update to the Raymarine AIS 650, via the SD card.

We are still getting the AIS target. This is a problem because we can't delete it and it is blocking the boat icon on the screen.

Any input is appreciated.
Find all posts by this user
Quote this message in a reply
05-04-18, 12:32 PM
Post: #2
RE: [CA] Seeing own boat as AIS target
Welcome to the Raymarine Forum Mick,

Please specify how you have interfaced the AIS650 to your MFD ... via SeaTalkng/NMEA 2000, via NMEA 0183, or both. Please additionally specify whether the system includes any additional AIS receiver or transceivers such as one which may be part of a VHF radio.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-08-18, 06:23 AM
Post: #3
RE: [CA] Seeing own boat as AIS target
We found that the Icom VHF was picking up the Raymarine AIS650 & displaying the target over nmea2k. We blocked the MMSI # in the Icom and that took care of the problem.
Find all posts by this user
Quote this message in a reply
05-08-18, 08:10 AM
Post: #4
RE: [CA] Seeing own boat as AIS target
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us