(DG) Raydata speed transducer

[Derek - Raymarine - Moderator]

Dear OLMako20
Thankyou foryour enquiry.

If the current transducer is a combined depth and speed transducer, then you will need an 'Active Insert', which you will need to order direct from Airmar or from Gemeco click here

This insert has a cable which will need to be spliced into the cable currently running from the combined transducer to the RayData.

If you have a separate speed and separate depth Transducer, then check the diameter of the INSIDE of the hull fitting, if it is 41mm then it is the early style and again a replacement will have to be ordered from Airmar or Gemeco. If it is 31mm, then an insert from the current Raymarine through hull Plastic transducer, E26031 can be used.

Regards