Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C70 Fuel Monitoring
05-14-18, 05:16 PM
Post: #1
C70 Fuel Monitoring
I have the Fox Marine Engine Gateway networked to my C70 Chartplotter classic. Is there a way to enter the Fuel for the Tank so it can track how much is used?
Find all posts by this user
Quote this message in a reply
05-16-18, 12:11 PM
Post: #2
RE: C70 Fuel Monitoring
Welcome to the Raymarine Forum Brad,

Unlike later MFDs designs which run LightHouse II or LightHouse 3 software, the A/C/E-Series Classic MFDs, G-Series systems, and C/E-Series Widescreen MFDs did not support a Fuel Management feature. These MFDs were designed to report exclusively report tank levels from NMEA 2000 tank level sensors.
Find all posts by this user
Quote this message in a reply
05-16-18, 04:34 PM (This post was last modified: 05-16-18 08:22 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: C70 Fuel Monitoring
Thanks for the reply. Thinking of upgrading, since Fuel Management was the primary reason I installed the Fox-Marine Monitor.
Find all posts by this user
Quote this message in a reply
05-16-18, 08:27 PM
Post: #4
RE: C70 Fuel Monitoring
Brad,

The Fuel Manager feature of MFDs running LightHouse II and LightHouse 3 software is indeed great. With the Fox Engine Gateway and my MFDs running LightHouse II software, I amaze them at the fuel dock by usually being within a few tenths of a gallon in guessing how much fuel will be required to top off the tank.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)