[CA] [CA11] Ray Control, Ray Remote on Lighthouse II
|
07-05-18, 11:40 AM
Post: #6
|
|||
|
|||
RE: [CA11] Ray Control, Ray Remote on Lighthouse II
JBomber,
Q1. Is there anything I can do "in the field"? A1. Should the Navionics Sonar Logging feature be enabled, you may want to try configuring it to OFF. I am aware of no other options which may correct the reported symptom other than possibly performing a System Settings and Data Reset command. Unfortunately, should the problem persist, then there would be no other recommendations other than to have the MFD bench tested/serviced by the Repair Center. Q2. Would a large area of Navionics charts affect it? A2. With the possible exception of having enabled the Navionics Sonar Logging feature and then having executed it continuously for a very, very long time as specified above, I am aware of no issue related to the use of Navionics cartography which may trigger the reported issue. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Ray Control, Ray Remote on Lighthouse II - JBomber - 05-16-18, 09:32 AM
RE: [CA11] Ray Control, Ray Remote on Lighthouse II - Chuck - Raymarine - Moderator - 05-17-18, 08:31 AM
RE: [CA11] Ray Control, Ray Remote on Lighthouse II - JBomber - 07-05-18, 04:49 AM
RE: [CA11] Ray Control, Ray Remote on Lighthouse II - Chuck - Raymarine - Moderator - 07-05-18, 09:03 AM
RE: [CA11] Ray Control, Ray Remote on Lighthouse II - JBomber - 07-05-18, 09:30 AM
RE: [CA11] Ray Control, Ray Remote on Lighthouse II - Chuck - Raymarine - Moderator - 07-05-18 11:40 AM
RE: [CA11] Ray Control, Ray Remote on Lighthouse II - JBomber - 07-05-18, 03:03 PM
RE: [CA11] Ray Control, Ray Remote on Lighthouse II - JBomber - 07-07-18, 02:09 PM
RE: [CA11] Ray Control, Ray Remote on Lighthouse II - Chuck - Raymarine - Moderator - 07-08-18, 09:32 AM
|
User(s) browsing this thread: 1 Guest(s)