[CA11] I70 Dangerous Targets Alarm always reboots turned ON

[Chuck - Raymarine - Moderator]

Matt,

I have been unable to duplicate the reported problem using our systems. Should you have configured the Dangerous Targets and Safety Messages to OFF on your i70 MFID, then these settings should be persistent between power cycles. It is recommended that a Factory Reset be performed to the i70 MFID and that the i70 MFID be reconfigured afterwards. Should the problem persist, then the i70 MFID should be sent to Raymarine’s Product Repair Center to be bench checked / serviced.