Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] trigger output voltage
05-22-18, 07:46 AM (This post was last modified: 05-22-18 01:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] trigger output voltage
i have an e80 classic and the raydome will not rotate. i checked the voltage of the trigger outage and got 2.7 volts.Is this the right voltage?
Find all posts by this user
Quote this message in a reply
05-22-18, 01:25 PM
Post: #2
RE: [CA11] trigger output voltage
Welcome to the Raymarine Forum kfrenier,

Please note that diagnostics and product repair information supported by Raymarine Product Support is limited to identifying the product, not component, not component which is believed to have failed within the system. Should the radome feature an analog video interface (i.e. it's radar cable connects directly to the MFD's Radar socket (not SeaTalkhs socket)), then Please click here to view a FAQ addressing troubleshooting problems with such radomes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)