The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG11) ST60+ wind speed
05-22-18, 10:44 PM (This post was last modified: 05-24-18 06:24 AM by Derek - Raymarine - Moderator.)
Post: #1
Bug (DG11) ST60+ wind speed
ST60+ display with R28170 masthead. Display accurately shows direction but 0.0kts for wind speed. All voltages at display back and mast base junction box nominal: acceding to posted specs. R28170 removed 5 months ago and returned for service but tech could not reproduce error. With direction working, obvious that red and shield/ground working, and blue and green wires also show nominal voltage. Yellow wire measured at less than 1V at display back, junction box. Removed ONLY yellow from junction box and measured voltage across shield and yellow still less than a volt.

Display, cable, R28170: simple system, but having trouble finding problem

We have a long Pacific Ocean crossings in a week and do need wind speed. Boat in French Polynesia.

I need help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG11) ST60+ wind speed - Wings - 05-22-18 10:44 PM
RE: (DG11) ST60+ wind speed - Wings - 06-08-18, 01:47 AM
RE: (DG11) ST60+ wind speed - Wings - 06-08-18, 01:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)