Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG11) ST60+ wind speed
05-24-18, 06:30 AM
Post: #2
RE: (DG11) ST60+ wind speed
Hi Wings

Thank you for your enquiry.

The voltages should be as per this link here , and so as you can see, the voltage measured on the yellow to screen is incorrect - hence the dashes on the apparent wind speed display on the instrument.

This implies there is an issue with the mast cable, the masthead sensor or the mounting block at the top of the mast.

Check the pins at the top of the mast,are they damaged or corroded in any way? check the mast cable for continuity,has the cable become damaged.

regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG11) ST60+ wind speed - Wings - 05-22-18, 10:44 PM
RE: (DG11) ST60+ wind speed - Derek - Raymarine - Moderator - 05-24-18 06:30 AM
RE: (DG11) ST60+ wind speed - Wings - 06-08-18, 01:47 AM
RE: (DG11) ST60+ wind speed - Wings - 06-08-18, 01:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us