Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
a78 displays "Vectors Rel" highlighted in pink on the chart page
04-08-16, 10:53 AM
Post: #1
a78 displays "Vectors Rel" highlighted in pink on the chart page
My a78 displays "Vectors Rel" highlighted in pink on the chart page in the upper left hand corner. What does that indicate? Using NOAA vector charts.
Find all posts by this user
Quote this message in a reply
04-08-16, 01:07 PM (This post was last modified: 04-08-16 01:08 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: a78 displays "Vectors Rel" highlighted in pink on the chart page
Welcome to the Raymarine Forum scoffer,

The referenced text is not dependent upon any specific type of cartography used with the MFD. The referenced text will be displayed when the Chart application's Radar Overlay feature has been configured to ON and the Motion Mode setting has been configured to Relative Motion. This text is alerting the operator that the reported data for targets will be in the relative reference frame rather than the true reference frame.
Visit this user's website Find all posts by this user
Quote this message in a reply
04-08-16, 03:12 PM
Post: #3
RE: a78 displays "Vectors Rel" highlighted in pink on the chart page
OK, thanks Chuck.
Find all posts by this user
Quote this message in a reply
04-08-16, 03:14 PM
Post: #4
RE: a78 displays "Vectors Rel" highlighted in pink on the chart page
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us