The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA11] Axiom and e97 on network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom and e97 on network
05-29-18, 08:41 AM (This post was last modified: 05-30-18 01:12 PM by Chuck - Raymarine - Moderator.)
Post: #1
barthbjr Offline
Junior Member
**
 		Posts: 9
Joined: Feb 2016
Reputation: 0
[CA11] Axiom and e97 on network
I have a new Axiom 9 that has been installed on my network which is a Seatalkng and using a hs5 network network switch. On the seatalkng network I have a e97, ACU200 and EV1, P70R and a i70. On the hs5 I have a CP100 and RD410HD Radar. When I have to choose the data master - if I choose the e97, the Axiom 9 cannot communicate with the e97. If I choose the Axiom 9, the e97 does not communicate with the Axiom 9. Communication with the other items on either network work fine. Is there any way for the Axiom 9 and the e97 to exist on the same network?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom and e97 on network - barthbjr - 05-29-18 08:41 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication