Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Flir T-450 dual not getting low light video
06-04-18, 07:59 AM (This post was last modified: 06-06-18 11:32 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Flir T-450 dual not getting low light video
I have a T-450 which displays the IR video but I am unable to toggle to the visible light video. Any tips on how to resolve? It is attached to a Raymarine Seatalk network and joystick control unit, and was new in about 2012. All controls work except ability to switch to low light video.
Find all posts by this user
Quote this message in a reply
06-06-18, 02:18 PM
Post: #2
RE: [CA11] Flir T-450 dual not getting low light video
Welcome to the Raymarine Forum rreimann,

It is recommended that you verify that the SCENE button of the JCU may be used to control the contrast of the thermal imaging. If so, it would eliminate the possibility that the JCU has suffered a failure of its SCENE button and would indicate that the T450 has suffered a failure of its internal circuitry necessitating that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us