Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Auto pilot
05-31-18, 08:30 AM (This post was last modified: 06-01-18 10:08 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Auto pilot
I will soon be having an Auto pilot installed on my boat .. The Dealer will be doing it and I would prefer to stay with all Raymarine. My MFD is an e127. The boat is a 30 foot Grady White marlin with twin F250 Yamaha Outboards ., Seastar power assist steering and each motor has a hydraulic cylinder. I believe they are HC5345's. ... Basically I want to double check that the dealer installs the proper pump and system .. So can you tell me what you would install if it were your boat. ?

In advance .. Thanks
Find all posts by this user
Quote this message in a reply
06-01-18, 10:30 AM (This post was last modified: 06-01-18 10:37 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Auto pilot
Welcome to the Raymarine Forum Tony,

Should the steering rams be installed in series (most common) rather than parallel, then a Type 1 Hydraulic Pump would be used for this application. The Type 1 Pump will be installed between the power assist pump and the steering ram. Should the vessel feature a 12V electrical system, then it would be recommended that an EV-150 be installed for this application.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)