Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Power Switch for i70s Display
06-11-18, 05:22 PM (This post was last modified: 06-13-18 03:37 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Power Switch for i70s Display
I am considering an i70s display in the interior of my sailboat for when I'm on long passages.

I would like to be able to power the unit on/off without turning off all the instruments (SmartPilot S2, depth, speed, wind, etc). This is for battery/power consumption reasons.

Can I put an inline toggle switch on the red line in the SeaTalk cable to safely power the unit on/off without interfering with the other instruments?

Thanks!!
Find all posts by this user
Quote this message in a reply
06-13-18, 03:41 PM
Post: #2
RE: [CA11] Power Switch for i70s Display
Welcome to the Raymarine Forum JYLC48,

Please be aware that the i70S features a power button, permitting it to be switched OFF when not needed. As long as the i70S is simply functioning as a repeater within your system, then switching it OFF should have no impact upon the other devices within the system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)