Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] No AIS icon on MFD C90W
06-12-18, 10:03 AM (This post was last modified: 06-12-18 11:59 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] No AIS icon on MFD C90W
I have an AIS650 (Sw.Version 2.02) connected to C90W (Sw. Version V2.35) and other Raymarine Instruments trough a Seatalk NG backbone..
I can fully operate AIS650 with ProAIS2 software (Version 01.10.01) with a PC/USB port. AIS650 receives other ships information and transmits current position and vessel information to other vessels.
Although, C90W Icon shows “NO AIS” and no AIS information on chart.
Find all posts by this user
Quote this message in a reply
06-12-18, 12:10 PM
Post: #2
RE: [CA11] No AIS icon on MFD C90W
Welcome to the Raymarine Forum Sergio,

Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us