The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST 60 Tridata Speed Indication INOP
06-13-18, 12:52 PM (This post was last modified: 06-14-18 11:16 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST 60 Tridata Speed Indication INOP
My RayData M78879 display installed in our 1999 Searay 310 Sundancer failed last year, and unable to find an exact replacement, I replaced the failed instrument with an ST60 Tridata Instrument. The depth indication seems accurate but the ST60 will not display speed.

The parts manual for our boat indicates the following transducers are installed:

933853 TRANSDUCER, DEPTH RETRACTABLE VALOX RAYDATA
933861 TRANSDUCER, SPEED SELF SEALING VALOX RAYDATA

Do I also need to replace the depth and speed transducers for proper operation of the ST60? The ST60 Operator Manual specifies an M78712 speed transducer and either a M78713 or M78718 depth transducer for a fiberglass hull.

If so, are the new transducers compatible with the existing thru-hull fittings, or will those need to be replaced also?

Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ST 60 Tridata Speed Indication INOP - MissHan - 06-13-18 12:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)