Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Depth alarm on i70s can only be set in steps of 1 meter
06-13-18, 04:12 PM (This post was last modified: 06-14-18 02:43 PM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] Depth alarm on i70s can only be set in steps of 1 meter
Hi,
I just installed a i70s display and wanted to set a depth alarm to 1.4m. But i can only set the alarms to full meters (1, 2, 3, etc.).
Is there a possibility to set the alarm to the decimal level?

Its a nice display but a depth alarm on full meters will be practically unusable for many boats i guess.

If setting the alarm to the decimal level is not possible, will you consider building this in the next software version?

Kind regards,
Bram.
Find all posts by this user
Quote this message in a reply
06-15-18, 04:41 AM
Post: #2
RE: [DG11] Depth alarm on i70s can only be set in steps of 1 meter
Hi bhavers

Thank you for your enquiry.

The alarm function can only be set in 1m increments, however, if you select depth units as Feet, you can select the alarm in 1ft increments

Regards
Derek
Find all posts by this user
Quote this message in a reply
06-15-18, 03:29 PM
Post: #3
RE: [DG11] Depth alarm on i70s can only be set in steps of 1 meter
Derek, thanks.

Having the units set to feet is nice workaround but not really an option ;-)

Can you ask product development to consider this as an improvement in a software update?

Kind regards,
Bram.
Find all posts by this user
Quote this message in a reply
06-18-18, 06:23 AM
Post: #4
RE: [DG11] Depth alarm on i70s can only be set in steps of 1 meter
HI bhavers

Thanks for the feedback, I have escalated to the development team for comment and possible inclusion in a future update.

Please read this for conditions relating to possible updates.
kind regards
Derek
Find all posts by this user
Quote this message in a reply
04-29-19, 08:45 AM
Post: #5
RE: [DG11] Depth alarm on i70s can only be set in steps of 1 meter
Hi,

Is it already possible to take steps of 0.1 meter.
because the boat is 1,2 meter deep, it is really clumsy at 2 meters setting.

Thanks in advance!
Enzio
Find all posts by this user
Quote this message in a reply
04-29-19, 10:09 AM
Post: #6
RE: [DG11] Depth alarm on i70s can only be set in steps of 1 meter
Hi Breeze,

this feature has not yet been updated.
Thanks
Derek
Find all posts by this user
Quote this message in a reply
04-29-19, 11:15 PM
Post: #7
RE: [DG11] Depth alarm on i70s can only be set in steps of 1 meter
Hi Derek,

Is it possible for next update ?

Greetings,
Breeze
Find all posts by this user
Quote this message in a reply
04-30-19, 07:22 AM
Post: #8
RE: [DG11] Depth alarm on i70s can only be set in steps of 1 meter
Hi Breeze,

I cannot confirm what features will be included in the next update I am afraid.

please refer here for further information

We recommend that you regularly check the raymarine website for updates.

Regards
Derek
Find all posts by this user
Quote this message in a reply
04-30-19, 10:35 AM
Post: #9
RE: [DG11] Depth alarm on i70s can only be set in steps of 1 meter
Is it really difficult to make it happen. Or make settings in centimeters would als be verry nice and a great workaround
Find all posts by this user
Quote this message in a reply
04-30-19, 10:49 AM
Post: #10
RE: [DG11] Depth alarm on i70s can only be set in steps of 1 meter
Hi Breeze,
Thankyou for your feedback,

we have passed this on to our engineering team.
Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)