Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mount for P70R
04-12-16, 05:14 PM
Post: #1
Mount for P70R
Has anyone come across a mount for the P70R? The only thing I have found so far is the very pricey NavPod option. I just want a cradle style mount for my P70R controller. Flush mounting on the dash is not possible due to space constraints. Even though there is enough space in a few spots, it would just be too ungainly to try and reach the unit, as I would have to almost reach around the wheel. I want to put it in a cradle just to the left of the helm so it will be easily reachable. The only option I can come up with is building a small little box to mount it in and then mount that to dash.

I'm attaching a picture of where I intend to place the unit.

Any suggestions would be appreciated.

http://forum.raymarine.com/attachment.php?aid=162

1977 SeaRay SRV 240 SDB
Raymarine a78 / CPT100, EV-100 Power, CP200 / CPT 200, Ray60
Find all posts by this user
Quote this message in a reply
04-13-16, 08:28 AM
Post: #2
RE: Mount for P70R
There is nothing currently available for bracket mount options, but you might want to look online for a bracket mount for the old ST60 instruments that might be able to be fabricated to work with the p70/R control heads.
Find all posts by this user
Quote this message in a reply
04-13-16, 11:57 AM
Post: #3
RE: Mount for P70R
The only thing I've been able to find so far is a mount for the ST60, which is more of a rectangular shape.
Find all posts by this user
Quote this message in a reply
04-13-16, 01:58 PM
Post: #4
RE: Mount for P70R
I've mounted one with a RAM mount before, it looked amazing. I don't know the model unfotrunately, but I dare say it was meant for products like this. It had the usual ball ends for the angle adjustment and the part that attached to the P70R was a square with [censored] spaces that perfectly lined up with the mount holes of the P70R and there was a hold cutout in the center that again, looked like it was meant to be there. If I can locate pictures of it, I will follow up later.
Find all posts by this user
Quote this message in a reply
04-13-16, 04:00 PM
Post: #5
RE: Mount for P70R
Part number for the older ST60 bracket mount was E25009.
Find all posts by this user
Quote this message in a reply
04-19-16, 09:33 AM
Post: #6
RE: Mount for P70R
(04-13-16 04:00 PM)Steve - Raymarine - Moderator Wrote:  Part number for the older ST60 bracket mount was E25009.

I have the same problem. Will the p70 control head fit on the ST60 bracket mount (E25009)? Is it still available for purchase?
Thanks.
Find all posts by this user
Quote this message in a reply
04-19-16, 09:48 AM
Post: #7
RE: Mount for P70R
(04-13-16 01:58 PM)Seacom Wrote:  I've mounted one with a RAM mount before, it looked amazing. I don't know the model unfotrunately, but I dare say it was meant for products like this. It had the usual ball ends for the angle adjustment and the part that attached to the P70R was a square with [censored] spaces that perfectly lined up with the mount holes of the P70R and there was a hold cutout in the center that again, looked like it was meant to be there. If I can locate pictures of it, I will follow up later.

I spoke to Ram mount customer service. They could not locate a product that matched. I might have to fabricate something. If you can find more info, it will be very much appreciated.
Thanks.
Find all posts by this user
Quote this message in a reply
04-19-16, 10:01 AM
Post: #8
RE: Mount for P70R
The E25009 is no longer available, it's discontinued, but I searched online and found a couple available there.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us