Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] SL70RC Plus - What 'series' and User data files
06-27-18, 07:29 AM
Post: #2
RE: [DG] SL70RC Plus - What 'series' and User data files
HI Derek,
Thank you for your enquiry

These units belong to a retired product line known as Pathfinder Series Displays. When a Pathfinder Series display is powered on a boot screen will be displayed referencing Raymarine or Raytheon. If the boot screen references Raymarine, then the display is considered to be a Pathfinder PLUS Series Display and will be compatible with C-Map's NT+ cartography (including NT+ Wide).
Pathfinder PLUS Series displays having a Raychart (chart card reader) that are operating with v4.09 or v4.11 software installed within their program memory will additionally be compatible with C-Map’s 128KB User Cards. C-Map User Cards are used to back up waypoints and routes and to transfer such data between a PC and a Pathfinder PLUS Series display. If one owns an E86008 C-Map USBCC Reader (no longer available), then it is recommended that Raymarine's RayTech Planner or RayTech RNS 6.0 software be used for waypoint/route planning purposes. If not, then it is recommended that C-Map's PC Planner software be used for such purposes.
The files are stored on a C-Map user card in their own format and so it would be recommended to contact C-Map to find out how to extract this data in the current more modern GPX format.

regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG] SL70RC Plus - What 'series' and User data files - Derek - Raymarine - Moderator - 06-27-18 07:29 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)