Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] st60 depth gauge not working need new transducer
06-27-18, 08:55 PM (This post was last modified: 06-28-18 11:16 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] st60 depth gauge not working need new transducer
I have a 1988 st60 depth gauge connected with a st60 speed and st60 wind instrument. I believe the transducer is no longer working and needs to be replaced. What transducer model would be the correct replacement, and would it also work with a i50 If I find the display is also bed? The current transducer is a 2" through the hull transducer and original equipment.
Find all posts by this user
Quote this message in a reply
06-28-18, 01:52 PM
Post: #2
RE: [CA11] st60 depth gauge not working need new transducer
Welcome to the Raymarine Forum Vela,

I suspect that there may have been a typographical error within the year state for the ST60 Depth instrument, as the ST60 intruments had been introduced in the 1998 time frame, not the 1988 time frame. The ST60 Depth instrument may be used with any analog (vs Smart) instrument depth transducer which Raymarine presently markets for use with i50 instrument and the iTC-5. Please clickhere to view the web pages listing the compatible instrument Depth transducers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)