Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Radar Scanner
07-01-18, 04:33 PM (This post was last modified: 07-02-18 03:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Radar Scanner
I have a 4” open array scanner that makes a lot of noise while operating. Am I able to grease the bearings on this unit? Thanks Ray
Find all posts by this user
Quote this message in a reply
07-02-18, 03:48 PM
Post: #2
RE: [CA11] Radar Scanner
Welcome to the Raymarine Forum rwvw415,

Such noise would typically be indicative of a gearbox or bearing surface which is wearing or has become worn. Unfortunately, these items are not designed to be serviced by product owners and it would be recommended that an open array pedestal which is experiencing such issues be sent to Raymarine’s Product Repair Center to be bench checked / serviced. That said, please be aware that Raymarine can only provide parts and service for pedestals having an Ethernet communications interface (i.e. HD Open Array Pedestals, SuperHD Open Array Pedestals, and Magnum Open Array Pedestals).
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us