The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Marine Cameras v / [CA] [CA11] How many devices can be fed by a Raymarine PoE Injector?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] How many devices can be fed by a Raymarine PoE Injector?
07-02-18, 01:27 PM (This post was last modified: 07-03-18 10:43 AM by Chuck - Raymarine - Moderator.)
Post: #1
Pau Hana Offline
Junior Member
**
 		Posts: 12
Joined: Jun 2018
Reputation: 0
[CA11] How many devices can be fed by a Raymarine PoE Injector?
I am installing an Axiom Pro network, and have the FLIR MD324 thermal camera that was previously connected to an e125.

I plan on installing a Cam220IP to monitor reverse operations.

Question- the FLIR camera is fed by its PoE injector. Can I also run the CAM220IP off the same injector, or should I run it off its own power supply and then to an HS5 switch?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] How many devices can be fed by a Raymarine PoE Injector? - Pau Hana - 07-02-18 01:27 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication