Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] raystar antenna to c80 MFD ?
07-08-18, 09:49 PM (This post was last modified: 07-24-18 01:02 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] raystar antenna to c80 MFD ?
I have a c80 installed in a boat and need to install the appropriate antenna, Ive found a used Raystar 120 antenna locally , will this work and does this diagram of the 130 installation apply to the 120?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
07-24-18, 01:13 PM (This post was last modified: 07-24-18 01:14 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] raystar antenna to c80 MFD ?
Welcome to the Raymarine Forum gabilgerat,

The chart which you have referenced may only be used to interface a Raystar 130 or Raystar 150 GPS Sensor to a C-Series Classic MFD.

The Raystar 120 GPS Sensor was produced in two versions, SeaTalk and NMEA 0183. One may determine which version one has by examining the vinyl medallion affixed to the upper shell of the GPS sensor, upon which was printed "SeaTalk' or "NMEA". Alternatively, a label is affixed to the lower shell of the transducer during production. The product ID and serial number of the GPS sensor were printed on this label. The product ID of the SeaTalk version of this GPS sensor was E32025. The product ID of the NMEA 0183 version of this GPS sensor was E32026.

The chart below describes how the SeaTalk version of the Raystar 120 GPS Sensor would be interfaced to the C-Series Classic MFD.

[Image: attachment.php?aid=2147]

The chart below describes how the NMEA 0183 version of the Raystar 120 GPS Sensor would be interfaced to the C-Series Classic MFD.

[Image: attachment.php?aid=2148]


Attached File(s) Thumbnail(s)
       
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us