Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] St6002
07-17-18, 01:34 AM (This post was last modified: 07-17-18 12:46 PM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] St6002
Hi, I’m having problems with my st6002. It will work fine for awhile and then displays “ release” after a while. Pressing the auto button turns the autopilot back on and it works fine for another 20 mins or so. The manual suggests a rudder sensor fault . Our boat runs ips 500 drives. Can this really be a sensory fault if it works perfectly for a period of time ?
Find all posts by this user
Quote this message in a reply
07-18-18, 05:34 AM
Post: #2
RE: [DG11] St6002
HI Tony44gt

Thankyou for your enquiry.

The Alarm RELEASE implies the pilot is receiving corrupted Rudder angle data, what gateway is being used between the IPS drives and the Autopilot computer?

There is likely a fault in this gateway.
Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)