Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
P70/ EV1 heading sensor & ACU update
07-09-18, 05:09 PM (This post was last modified: 07-19-18 01:53 AM by Tom - Raymarine - Moderator.)
Post: #1
P70/ EV1 heading sensor & ACU update
Good Afternoon,
P70/ EV1 heading sensor & ACU
I am looking to see if there is another method to update the above units to the latest software version without going through an outdated mfd? I am stuck with a C120 Classic which affords me with no option to update my A/P according to the directions. If there is a workaround for this I would be very happy ;)
Chris
Find all posts by this user
Quote this message in a reply
07-19-18, 01:56 AM
Post: #2
RE: P70/ EV1 heading sensor & ACU update
Sorry Chris, it's not possible to update those pilot components from a C-Classic because it has no support for STNG (it has a minimally-functional, very early NMEA2000-ish 'Seatalk2' port, but no software support for upgrading SeatalkNG products.)

I think you'll need to beg/borrow/steal a newer display or ask your local Raymarine technical dealer to do the upgrade for you.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us