Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Miracast with the Axiom Pro
07-29-18, 09:47 PM
Post: #6
RE: [TG11] Miracast with the Axiom Pro
I'm sorry to say that there's limited diagnostics that can be done for this sort of wireless connection issue, but it might be a useful test to see what happens if you can put a Windows 10 laptop close to where the Axiom is and connect that to the WD adaptor: does that connection work reliably? Alternatively, if you put a smartphone or tablet running our Rayremote or Raycontrol apps close to where the WD adaptor is (e.g. behind the TV - perhaps the body of the TV itself is blocking some of the signal?) and connect that over Wifi to the Axiom in order to repeat what's on the Axiom's display, does that connection work reliably? These tests will help to eliminate potential causes such as RF interference from an unintentional radiator (faulty device), a hardware problem with the Axiom's Wifi, a faulty WD adaptor, wireless signal level between the Axiom's location and WD adaptor's location, etc..

Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Miracast with the Axiom Pro - Tom - Raymarine - Moderator - 07-29-18 09:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)