Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] Autopilot Upgrade
07-12-18, 04:59 AM (This post was last modified: 07-12-18 04:59 AM by Derek - Raymarine - Moderator.)
Post: #2
RE: [DG] Autopilot Upgrade
Hi oricohen

Thank you for your enquiry.

If you want to upgrade the Fluxgate Compass to an EV1 sensor, then you will have to change the S3G to an ACU400, the EV1 cannot be used with an S3G computer.

When using a fluxgate compass with an S3G Autopilot, the compass sensor must always be connected directly to the S3G computer unit.

The E120 Classic style display, can be connected to a HD Digital radome, but cannot be connected to the new Quantum radomes.

Our suggestion would be to upgrade to the EV1 sensor, ACU400 and check the drive is still in good condition, or consider returning it to our workshops for full service

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] Autopilot Upgrade - oricohen - 07-11-18, 06:04 PM
RE: [DG] Autopilot Upgrade - Derek - Raymarine - Moderator - 07-12-18 04:59 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us