Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GPS RS125 and C95
04-18-16, 01:06 PM
Post: #1
GPS RS125 and C95
Upgrading to a C95. Can I connect my GPS RS125 to the C95? If so, what cables are required? Also, I need to connect my Raymarine 55 VHS to the GPS for DSC. What cable can I use for the VHS radio?

Thanks,
Phil...
Find all posts by this user
Quote this message in a reply
04-19-16, 09:12 AM (This post was last modified: 04-19-16 09:18 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: GPS RS125 and C95
Welcome to the Raymarine Forum SAUSTOP,

It is indeed possible to interface a Raystar 125 GPS Sensor to an a/c/e/eS/gS-Series MFD. As the Raystar 125 GPS Sensor may be installed to support 4800 BAUD NMEA 0183 communications and both the MFD and VHF radio support 4800 BAUD NMEA 0183 communications, it is recommended that the GPS sensor be interfaced as shown below:

[Image: attachment.php?aid=168]

See the VHF radio's harness for its NMEA 0183 Input leads.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)