[CA] [CA11] Upgrading from SL70 to ev200 and E127’s

[markdd3880]

Thanks Chuck
Just so I understand correctly:

1) are there firmware updates that cannot be applied by wifi connection with the MFD and can only be performed by downloading to a micro sd card then put into the mfd?
2) when I factory reset the autopilot from the P70Rs does that reset both the ACU and the EV 200 combined? Ie “autopilot factory reset”
3) If so I would assume the order of reset would be first the autopilot reset( acu and ev200) followed by the P70Rs?
4) I have tried 4 locations now for the ev 200 and cant get deviation less than 19 degrees???one location was midships more or less water line at least 5 feet from machinery etc ..... which is difficult!!!
Next move is to bring it up into the salon and try distancing above everything but I thought I could try a factory reset first.
I am unable to get the latest firmware through the mfd and wifi so will have to wait until I go home and get them with my pc. Then start over.