[CA] [CA11] Upgrading from SL70 to ev200 and E127’s

[markdd3880]

Chuck
I just wanted to follow up and let you know the problem I found.
I relocated the ev1 sensor core from deck level to approx 5 feet higher completed factory reset on everything obtained 1 deg deviation on 3 compass resets. This allowed the AP to be able to be synched with the Gps.
Ran nice long course very calm and COG was constantly within 1 degree of heading in differing directions

Onboard compass still reading 20+ degrees higher so checked with separate electronic compass . Turns out its out that amount! Who would have thunk!

Last quick question on the AP ..
is there any remote control that will allow confirmation of altering course when using the autopilot in track mode. This cannot be done from the cell app. Using the E127 MFD

Thanks again
Mark