Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[BG] [BG11] ST 4000 replacement suggestion
07-31-18, 05:53 PM (This post was last modified: 08-02-18 10:51 AM by Brian G - Raymarine -Moderator.)
Post: #1
[BG11] ST 4000 replacement suggestion
I have a ST 4000 wheel pilot with a Navcenter 600 Chartplotter, & St50 plus instruments/GPS/Navdata interconnected with Seatalk. I am looking to replace my wheel pilot and I am wondering what is the recommended replacement? Anything that will work with my old stuff?
Find all posts by this user
Quote this message in a reply
08-02-18, 11:38 AM
Post: #2
RE: [BG11] ST 4000 replacement suggestion
The modern replacement for your ST4000w is our EV-100 Wheel Pilot Pack (part# T70152) which includes the p70s autopilot control, the ACU-100 actuator control unit, the EV-1 Sensor core, the EV1 cabling kit, and the current MK2 wheel drive. You can bridge the modern autopilot's SeaTalkNG backbone to your legacy SeaTalk 1 system to share data as well. The basic concept of the SeaTalkNG backbone and adding components to the basic starter kit that comes with the autopilot kit is outlined here:

http://www.raymarine.com/view/?id=400
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)