Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Old rudder indicator with Evolution Course Computer
04-19-16, 11:56 PM
Post: #1
Old rudder indicator with Evolution Course Computer
I currently use an S1 SmartPilot (E15016) with two rudder indicators (A22008) attached. If I upgrade to a new Evolution style course computer will my existing rudder indicators still work?
Find all posts by this user
Quote this message in a reply
04-20-16, 08:51 AM
Post: #2
RE: Old rudder indicator with Evolution Course Computer
Yes, the rotary rudder reference sensor (M81105) that worked with the S1 Smartpilot autopilot system will work with the Evolution autopilot system, it would connect color for color to the ACU unit in the Evolution autopilot.
Find all posts by this user
Quote this message in a reply
04-20-16, 09:49 AM
Post: #3
RE: Old rudder indicator with Evolution Course Computer
Thanks Steve. I was not referring to the position sensor attached to the rudder, but rather the rudder position indicator on my instrument panel.
Find all posts by this user
Quote this message in a reply
04-20-16, 10:09 AM (This post was last modified: 04-20-16 10:10 AM by Steve - Raymarine - Moderator.)
Post: #4
RE: Old rudder indicator with Evolution Course Computer
The Seatalk 1 Rudder instrument display would work with the Evolution autopilot, the rudder reference sensor will need to be installed, and you would need a Seatalk to Seatalk NG converter and connect it to the Seatalk NG backbone established by the Evolution autopilot cabling.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)