Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] AIS 700 Class B cant see my own vessel
07-30-18, 06:36 PM (This post was last modified: 07-31-18 07:47 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] AIS 700 Class B cant see my own vessel
I recently installed the AIS 700 (programed by a dealer) using a Saetalkng connection. The status light on the AIS 700 Class B is GREEN.

On my E127 I see many boats and can read their data but I do not see my own vessel. At that time I was stationary.

ALSO I noted that some of the boats show their destination. How can I enter that info when I take a trip?
Find all posts by this user
Quote this message in a reply
07-31-18, 08:07 AM
Post: #2
RE: [CA11] AIS 700 Class B cant see my own vessel
Welcome to their Raymarine Forum epc7405,

Your system is functioning properly. The equipment is not designed to display your vessel as an AIS target ... only other vessel reporting AIS data will be displayed. Like most Class B AIS transceivers, the AIS700, as well as the AIS650 and AIS500 Class B AIS transceivers which preceded the AIS700, is not designed to be programmed with your vessel's destination data. Such data is included within the transmissions of Class A AIS transceivers such as the AIS950.
Visit this user's website Find all posts by this user
Quote this message in a reply
07-31-18, 10:59 AM (This post was last modified: 08-01-18 09:46 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] AIS 700 Class B cant see my own vessel
Thanks very much for the quick reply
Find all posts by this user
Quote this message in a reply
08-01-18, 09:46 AM
Post: #4
RE: [CA11] AIS 700 Class B cant see my own vessel
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us