[CA] [CA11] EV1 Linearization via e7 MFD or ST6002

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Tom,

While is not possible to perform the Dockside Wizard and other autopilot set-up and settings features of an Evolution autopilot via an ST600X/ST700X/ST700X autopilot control head, it is possible for a MFD running the latest LightHouse II software or LightHouse 3 software (v19.03 and v3.6.32 respectively at the time of this response). After ensuring the the the MFD has been updated with the latest LightHouse II software or LightHouse 3 software and that the MFD has been interfaced to the Evolution autopilot via a powered and properly terminated SeaTalkng / NMEA 2000 backbone, the MFD's Autopilot Controls feature (HOME->SET-UP->SYSTEM SETTINGS->EXTERNAL DEVICES->PILOT SET-UP->PILOT CONTROL) should be configured ON. All supported settings, including the Dockside Wizard, Pilot Factory Reset, Response Level, etc. may then be configured via the PILOT SETTINGS option within the Pilot Set-Up dialog (HOME->SET-UP->SYSTEM SETTINGS->EXTERNAL DEVICES->PILOT SET-UP).