[CA11] EV1 Linearization via e7 MFD or ST6002

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] EV1 Linearization via e7 MFD or ST6002

08-03-18, 02:22 PM

Post: #10

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] EV1 Linearization via e7 MFD or ST6002

Tom,

It would not be recommended that the ACU be installed within 3' of the EV-1 CCU. Particularly, as the deviation may vary with amount of power output by the ACU in powering the drive unit (power will vary from zero to max) when in use.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] EV1 Linearization via e7 MFD or ST6002 - Thombusc - 07-31-18, 11:53 AM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Chuck - Raymarine - Moderator - 07-31-18, 12:26 PM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Thombusc - 08-01-18, 03:54 PM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Chuck - Raymarine - Moderator - 08-02-18, 08:00 AM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Thombusc - 08-02-18, 10:54 AM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Chuck - Raymarine - Moderator - 08-02-18, 12:58 PM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Thombusc - 08-02-18, 03:08 PM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Chuck - Raymarine - Moderator - 08-03-18, 08:20 AM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Thombusc - 08-03-18, 08:35 AM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Chuck - Raymarine - Moderator - 08-03-18 02:22 PM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Thombusc - 08-03-18, 03:17 PM

RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Chuck - Raymarine - Moderator - 08-04-18, 06:05 AM

User(s) browsing this thread: 1 Guest(s)