Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E125 MFD vessel position not advancing
08-03-18, 06:01 AM (This post was last modified: 08-03-18 10:54 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E125 MFD vessel position not advancing
I have a E125 E70023 MFD. The MFD will intermittently stop advancing the vessel position on the display. The Lat/Long position advances correctly and all other features are working and there is no alarm. The vessel on the display will even rotate if I change course but the position is incorrect. I am attaching an image showing the the vessel in the wrong position on the MDF the Lat/Long is correct and also showing an alternate plotter showing the correct vessel position for comparison.

CS
Find all posts by this user
Quote this message in a reply
08-03-18, 10:23 AM (This post was last modified: 08-03-18 10:54 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] E125 MFD vessel position not advancing
Welcome to the Raymarine Forum Delfina,

Please generate and attach a Diagnostics...html file for this system and attach it to your reply. Please additionally indicate whether the MFD's installation location affords it an unobstructed view of the skies overhead.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)