Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 Classic Interface to AIS 650
04-20-16, 12:02 PM
Post: #1
E120 Classic Interface to AIS 650
I understand that to connect an AIS 650 to an E120 Classic (w/ SW V5.69) I must use the NMEA 0183 interface (38.4k between the E120 and AIS and 4.8k between the AIS and my VHF [Ray215]). I also have a SeaTalkng network connected to the E120. On the SeaTalkng network is an EV-1 autopilot, i70 display and Volvo Penta Converter (for engine data). Since the E120 Classic cannot process AIS PGNs, can I connect the AIS 650 to both the NMEA 0183 and SeaTalkng thus allowing the i70 to display AIS data.
Find all posts by this user
Quote this message in a reply
04-20-16, 12:48 PM
Post: #2
RE: E120 Classic Interface to AIS 650
Welcome to the Raymarine Forum Tim,

As the A/C-Series MFDs ignore SeaTalkng/NMEA 2000 PGNs containing AIS data, you may indeed interface the AIS receiver/transceiver to both the NMEA 0183 input port of an A/E-Series Classic MFD and to a SeaTalkng/NMEA 2000 backbone to which the MFD has also been interfaced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)