Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raymarine 300 course computer
08-20-18, 11:34 AM (This post was last modified: 08-21-18 01:58 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Raymarine 300 course computer
We have a raymarine 300 course comatter connected to an st6002 autopilot control head. After a period of about 7 months sailing we recieved a no pilot error. After going through all the recommended testing we could.not get the head to talk to the course computer even using new sea cables and connecting to a different control head the no pilot error persisted. We have a below deck auto pilot mechanism.

Question is without changing the below deck setup on our steering quadrant what course computer would we upgrade to from the 300 that would be compatible with with our below deck system. Any information would be greatly appreciated.

Thanks in advance

Dale
Find all posts by this user
Quote this message in a reply
08-21-18, 02:01 PM
Post: #2
RE: [CA11] Raymarine 300 course computer
Welcome to the Raymarine Forum Dale,

Please note that the drive units from older Raymarine autopilots may typically be retained for use with an Evolution autopilot. What model of drive unit (see the part number / serial number plate or stamping on the drive unit) is presently connected to your Type 300 autopilot course computer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)