Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Quantum not connecting by data cable to Axiom displays
08-24-18, 05:17 PM
Post: #1
Quantum not connecting by data cable to Axiom displays
I recently received my Quantum Radar back from repair. It now works using WiFi but when I attempt to connect using the data cable (A80275) the Axiom does not see it. The data cable is connected to a HS5 Switch which is connected to an Axiom 7 and Axiom 9. I bought a new data cable but it still doesn't work. I updated the software for the Quantum and Axiom to the newest version that came out in July. Is there any trick to get the Axiom to see the Radar? I prefer to use a cable instead of WiFi.
Find all posts by this user
Quote this message in a reply
09-07-18, 10:34 AM (This post was last modified: 09-07-18 10:34 AM by Dave - Raymarine - Moderator.)
Post: #2
[DM]RE: Quantum not connecting by data cable to Axiom displays
Hi jmcjmc817,

Does the port on the HS5 that the Quantum is connected to have a flashing green LED? Or, does it show activity? If it does not, then there is something wrong with the recently repaired Quantum.

- Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)