Raymarine forum / Raymarine Forums / Multifunction Displays v / es128 setup doesn't see ST-60 Instruments

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
es128 setup doesn't see ST-60 Instruments
04-25-16, 01:15 PM (This post was last modified: 04-27-16 01:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
Steve Schwartz Offline
Junior Member
**
 		Posts: 5
Joined: Mar 2016
Reputation: 0
es128 setup doesn't see ST-60 Instruments
I've just finished the installation of a new es128 MFD on my sailboat. I want it to display data from an ST-60+ Tridata and an ST-60 wind machine. The two older Sea Talk instruments are connected to a ST to STng converter and that is connected to the MFD. When I attempt to set the data selection on the MFD I get the following error message: "The following devices are preventing data source selection E22158-Sea Talk STNG converter S/N:0651037. Please see user manual for details."
What does this mean and should I do?

Thanks,

Steve
Find all posts by this user
Quote this message in a reply
04-27-16, 01:06 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: es128 setup doesn't see ST-60 Instruments
Welcome to the Raymarine Forum Steve,

Regarding the data source selection issue, please click here to view the FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication