Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom Pro 9 and Navionics sonar live
09-13-18, 07:04 AM (This post was last modified: 09-13-18 09:13 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Pro 9 and Navionics sonar live
Good Day,
Have a Axiom 9 pro and Navionics +. When using SonarChartâ„¢ Live which allows you to create new personal 1 ft/0.5 m HD bathymetry maps that develop in real time while navigating I have found that it over writes the RCA Lines( Rockfish Conservation Areas) on the chart. This is done even just running outside the line.
You then can not tell where the line is or where you are located to the RCA.
Can these lines be manually reentered or is there a way to make it so they are not overwritten?

Thanks,
Lance.
Find all posts by this user
Quote this message in a reply
09-13-18, 09:21 AM
Post: #2
RE: [CA11] Axiom Pro 9 and Navionics sonar live
Welcome to the Raymarine Forum Lance,

Per the limitations of use, Fishing Charts (as opposed to navigational chart) are not for navigation. In this case, it would appear that the Navionics SonarChart Live data is overlaying the Navionics Nautical chart data. One of the most frequently features for marking the boundaries of a marine sanctuary, exclusion zone, etc. is to bound the area with a route's leg lines (i.e. create a route having legs which overlay the boundaries of the area in question) and then command the Chart application to show (don't follow) the route. Choosing a contrasting color for the route's leg lines can be helpful in easily being able to view the route legs.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us