Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+
10-25-18, 08:28 AM (This post was last modified: 10-25-18 08:32 AM by Chuck - Raymarine - Moderator.)
Post: #16
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+
Dave,

Your latest diagram appears to be correct in all aspects except for one. The ST60+ instrument which is shown as being directly connected to the ST2000+ shows three SeaTalk cables being plugged into it. As each ST60+ instrument features only two SeaTalk ports, this is not possible. To correct the diagram, it is recommended that the ST2000+ and SeaTalk to SeaTalkng Converter Cable be connected to a D244 SeaTalk Junction Block, which will in turn be connected to the ST60+ instrument via an appropriate length of SeaTalk cable having molded press-fit plugs on each end of the cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+ - Chuck - Raymarine - Moderator - 10-25-18 08:28 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication